Inleiding
Magigoo Pro Flex is designed for professional use, to work exclusively with TPU (thermoplastic polyurethane), TPE (thermoplastic elastomer and TPC (thermoplastic copolyester) filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.
Magigoo Pro Flex has been designed and tested to work with different flexible filament brands.
How to
- Shake the bottle.
- Apply to the desired area by pressing the nib on the bed (activating the inner valve) and spreading as needed.
- Print according to the filament/printer manufacturers recommendations
- Allow to cool and Remove. The print should pop right off
- Clean - Use a damp cloth to wipe off.
Safety: Using this product with other than Flexible type filaments might cause over adhesion and damage your build surface.
Tips:
- For larger prints and filaments with a high shrinkage rate, a 20 mm brim is recommended.
- In cases of excess adhesion, it is recommended to wet print bed with a small amount of water slowly work it below the part, this should make part removal easier.
Er zijn opties beschikbaar voor dit product
